Working with fingerprint powders releases fine
particulate dust into the working environment, which should not be
inhaled. POWDERado SH131
is a workstation, that contributes to the bhealth and safety at a
fingerprint expert’s workplace. It provides an automated
filter system, entirely independent from on-site ventilation. It is a perfect alternative to conventional fume hoods.
The working surface of POWDERado SH131
is made from non-magnetic stainless steel. Below the working surface a
combination of a pre-filter fleece and a fine particulate dust cassette
H13 is used. The pre-filter keeps bigger dust particles off the H13
cassette and reduces by this a too frequent replacement of the
cassette. The running costs remain low.
POWDERado SH131 is operated via a touch panel display to control the fan speed as well as the various illumination options.
POWDERado SH131
features a microcontroller system which offers a manual as well as an
automatic mode. Opening of any of the flaps automatically starts the
fan at low speed and the incident white illumination is switched on. If
selected, every 4 hours a short cleaning cycle is performed, which
ensures that also fine dust particles, that only settle after a while,
are removed from the air inside POWDERado SH131.
The system can be used as a desktop instrument and also on an optional
wheeled trolley or a manually or electrically in its height adjustable
rack.
|
|
|
POWDERado SH131
indipendent from ventilation
